Blogger Store







Объем Розничные продажиРейтинг продукта
Изначальная ценаскидка
Последняя цена:
   Подробнее Подробнее   








  • Похожий продукт
  • Product Description




 

 

 

  • 1 x  mach3 4 Axis USB CNC Controller card 100KHz
  • 4 x single Axis TB6600 stepper motor driver
  • 1 x USB cable
  • 1 x CD (include with English user manual and mach3 software) 

This USB motion control card has the below advantages: small volume, easy to use, has a strong anti-interference ability, No need to install any USB drivers,it can be used after plugging in the computer. ,suitable for all versions of Windows. Fully supporting all Mach3 versions.

 

mach3 4 Axis USB CNC Controller card 100KHz

 1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;

 2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;

 3. Support automatic probe tool

 4. Support Emergency input

 5. Support for limit switch

 6. Support for connecting electronic handwheel

 7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.

 8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.

 9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device

 10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;

 11. 1 status LED, indicate connection status on the board.

TB6600 Driver description:

Characteristics:

1.DC power input type:12V~40V;

2.Output current:0~4.5A, stepless adjustable;

3.Mircostep:1,2,4,8,16;

4.Automatic half current function: half or full current can be Selected through the switch;

5.Protect form : Overheated protection, over-current protection;

I/O Ports:

1.24V+:DC power positive pole

2.GND:DC power cathode

3.A+  A-:Stepping motor one winding

4.B+  B-:Stepping motor other winding

5.CLK-:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)

6.CW-:Stepping motor direction input, voltage level touched off, high level foreward , low level reverse

7.ENA-: motor free 

8.+5V: Signal common terminal

 

 

  

 

Usb Card Dimensions:

 

English | Russian | Portuguese | Spanish | French | German | Italian | Dutch | Polish | Turkish
© 2018 adiganteng All Right Reserved